slave server error - unsure what they mean.

[Terrence Koeman]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Well, that's what you get when you copy stuff and don't check it all. I
ment to say:

Try this:

zone "bathgirls.co.uk" {
        type slave;
        file "named.bathgirls.co.uk";
        masters { 217.34.194.217; }
};

- -- 
Regards,

Terrence Koeman

Technical Director/Administrator
MediaMonks B.V. (www.mediamonks.nl)

Please quote all replies in correspondence. 

> -----Original Message-----
> From: Terrence Koeman [mailto:root at mediamonks.net]
> Sent: Wednesday, December 12, 2001 16:38
> To: Matt Darcy; Comp-Protocols-Dns-Bind at Moderators. Isc. Org
> Subject: RE: slave server error - unsure what they mean.
> 
> 
> Try:
> 
> zone "bathgirls.co.uk" {
>         type slave;
>         file "named.bathgirls.co.uk";
>         { masters 217.34.194.217; }
> };
> 
> 
> > -----Original Message-----
> > From: bind-users-bounce at isc.org
> > [mailto:bind-users-bounce at isc.org]On Behalf Of Matt Darcy
> > Sent: Wednesday, December 12, 2001 11:03
> > To: comp-protocols-dns-bind at moderators.isc.org
> > Subject: slave server error - unsure what they mean.
> > 
> > 
> > paint the picture.
> > 
> > I have 2 redhat linux servers 1 running bind 8.X and 1 running 9.X
> > 
> > The 8.X system is a master server for around 10 domains.
> > I am setting up the 9.X server as a slave for the 8.X system.
> > 
> > Here is a part of the config file from the master.
> > 
> > zone "bathgirls.co.uk" {
> >         type master;
> >         file "named.bathgirls.co.uk";
> > };
> > 
> > (this starts up fine and runs well.)
> > 
> > When I set up the slave like this.
> > 
> > zone "bathgirls.co.uk" {
> >         type slave;
> >         file "named.bathgirls.co.uk";
> >         { master 217.34.194.217; }
> > };
> > 
> > named appears to start but does not startup.
> > 
> > /var/log/messages shows this error
> > 
> > Dec 12 09:56:54 jordan named[3075]: starting BIND 9.1.0 -u named
> > Dec 12 09:56:54 jordan named[3075]: using 1 CPU
> > Dec 12 09:56:54 jordan named[3077]: loading configuration from
> > '/etc/named.conf'Dec 12 09:56:54 jordan named: named startup
> > succeeded Dec 12 09:56:54 jordan named[3077]: /etc/named.conf:40:
> > parse error near master
> > Dec 12 09:56:54 jordan named[3077]: loading configuration: failure
> > Dec 12 09:56:54 jordan named[3077]: exiting (due to fatal error)
> > 
> > I have no idea why this is happening.
> > 
> > When I set this server up as a master also named start fine put 
> > this note is
> > in messages
> > 
> > Dec 12 09:58:42 jordan named: named startup succeeded
> > Dec 12 09:58:42 jordan named[3194]: no IPv6 interfaces found
> > Dec 12 09:58:42 jordan named[3194]: listening on IPv4 interface lo,
> > 127.0.0.1#53Dec 12 09:58:42 jordan named[3194]: listening on IPv4 
> > interface
> > eth0, 10.11.216.13#53
> > Dec 12 09:58:42 jordan named[3194]: listening on IPv4 interface
> > eth1, 217.34.194.218#53
> > Dec 12 09:58:42 jordan named[3194]: master.c:1172: unexpected
> > error: Dec 12 09:58:42 jordan named[3194]: dns_master_load:
> > named.bathgirls.co.uk:1: no TTL specified. THIS ZONE WILL NO 
> > LONGER WORK IN
> > FUTURE VERSIONS. Add a TTL.
> > Dec 12 09:58:42 jordan named[3194]: dns_master_load:
> > named.bathgirls.co.uk:8: using RFC 1035 TTL semantics
> > Dec 12 09:58:42 jordan named[3194]: running
> > Dec 12 09:58:45 jordan named[3194]: lame server on 
> > 'alesi.projecthugo.co.uk'
> > (in 'projecthugo.co.uk'?): 217.34.194.218#53
> > 
> > 
> > can anyone help with these problems ???? and help me get my 2 DNS 
> > servers up
> > and running ok
> > 
> > Thanks,
> > 
> > Matt.
> > 
> > 
> > 

-----BEGIN PGP SIGNATURE-----
Version: PGP 7.1

iQA/AwUBPBd6V3xo/qu3lMSREQJqBQCfRjIZ8uLGVsjifj4QH/xZ1h0WdIwAoJnR
uAYoOxZZIsPbzemmVbLv5Qeb
=XSlS
-----END PGP SIGNATURE-----