TSIG and NTP
Joe Kattner
joe.kattner at adelphia.com
Fri Dec 21 19:57:17 UTC 2001
Look up NTP (network time protocol). Set up a client on the DNS server to
get updates from a public ntp server. You can also set up you're own ntp
server internally (can use some routers to do this also), and have that pull
from a public source, then point you're internal clients to that if these
are internal servers without outside access.
Check the logs to see if there are any other problems being logged.
--Joe
-----Original Message-----
From: Tony [mailto:tony.wong at stanford.edu]
Sent: Friday, December 21, 2001 12:28 PM
To: comp-protocols-dns-bind at moderators.isc.org
Subject: TSIG and NTP
Hi,
Currently running bind 8.2.5 REL on both a master and slave. I generated
keys with dnskeygen and put the key in both servers. It was working before I
wanted to go with TSIG.
Problem now is zone transfer is not working. I update a record on my master
and does not show up on the slave. I believe it has something to do with
time synchronization.
How do I get time synchronized between the 2 servers or better yet, sync the
time on both servers with a time server?
Thanks
More information about the bind-users
mailing list