start from 0

[Kevin Darcy]

There is no "bind 8.2.5". You probably mean BIND 8.2.2-p5. That version has horrible security exploits and it was probably hacking attempts that
crashed your nameserver and/or box. Upgrade to 8.2.3 at the very least, if not 8.2.4 or BIND 9 (not sure whether BIND 9 is available on your platform
or not).


- Kevin

future wrote:

> i had named running well , for 2 days than it hang up the p.c. , needed to do a hard reset , now its running on the providers (cable) dns again...
>
> my domein is future2005.com  (www is on nt system without dns) , the rest of my network is running on freebsd.)
>
> system 1 , dns1.future2005.com  , (bind 8.2.5. , dhcp 2 , freebsd 4.3 , sendmail , teapop . ipnat , ipfilter)
> networkcard1 , 62.163.31.202 (cable internet)
> networkcard2 , 10.0.0.1 (dns1.future2005.com)
> networkcard3 , 10.0.1.1 (router1.future2005.com)
>
> system 2 , www2.future2005.com  ,  (bind 8.2.5 freebsd 4.3 , apache 1.3 , sendmail )
> networkcard1 , 10.0.0.2 (goes to hub on 10.0.0.1)
>
> this is the main system that conects to the outside world
>
> extra routers for sharing secured internet to my windows clients
> -----------------------------------------------------------------------------------------------------------
> system 3 , gateway1.future2005.com . (bind 8.2.5 freebsd 4.2 , sendmail , ipnat , ipfilter)
> networkcard1 , 10.0.0.3 (goes to hub on 10.0.0.1)
> card 2 , 3 , 4 , 5 , 6 (192.168.xxx.xxx , on dhcp2 on system 3)
> is a system for the clients that need mutch bandwide
> company 7 , 8 , 9 , 10 , and 11
>
> my normal internet users are on this
> ------------------------------------------------------------------------------------------------------------
> system 4 , sabre 1     (freesco)
> netrworkcard1 , 10.0.1.10 (goes to hub on 10.0.1.1)
> card 2 , 3  (192.168.xxx.xxx , on dhcp system 4)
> company 1 and 2
>
> system 5 , sabre 2 (freesco)
> networkcard1 , 10.0.1.20 (goes to hub on 10.0.1.1)
> card 2 , 3  (192.168.xxx.xxx , on dhcp system 5)
> company 3 and 4
>
> system 6 , sabre 3 (freesco)
> networkcard1 , 10.0.1.30 (goes to hub on 10.0.1.1)
> card 2 , 3  (192.168.xxx.xxx , on dhcp system 6)
> company 5 and 6
>
> (this are my easy to use systems , have 6 in total but only use 3 of them)
> -------------------------------------------------------------------------------------------------------------
>
> my own workstations (win98se) are streat on a hub comming from the hub from 10.0.1.1
> that are system 10.0.1.101  (102 , 103 , 104 , 105 >>>>> 123 , 124) (24x)
>
> I CAN'T GET THIS NETWORK SETUP GOOD FOR IT'S OWN DNS
>
> i want to use dns1 as primary and www2 as secondary dns server
>
> i've tryed it several times but in the and it always craches after a day or two
>
> can some one help me to make a setup for this , (named.conf , and al the files)
>
> greetings  Frank....