Slave refresh error on zone segmented configuration

[Mark Andrews]

> Hello,
> 
> I have a master and slave server on the same subnet (I know It's not  
> the best way to proceed).
> I have configured master and slave using TSIG for zone transfer and  
> everything seems find.
> 
> I still have errors with refresh of the zones on my external view.
> 
> Do you know how I can force these refresh to querry a specific address.
> 
> The problem is that It's querrying 87.98.20.98 instead of 192.168.2.2  
> (complex NAT situation) //
> It should ask the refresh at IP 192.168.2.2 and not 87.98.20.98 //

	Well fix what you have put into named.conf.  Named does
	not automatically work out where to transfer from.
 
> 20-Feb-2007 10:23:07.167 info: zone agir.com/IN/externe: refresh:  
> retry limit for master 87.98.20.98#53 exceeded (source 0.0.0.0#0)
> 20-Feb-2007 10:23:07.167 info: zone agir.com/IN/externe: Transfer  
> started.
> 20-Feb-2007 10:24:22.171 error: transfer of 'agir.com/IN' from  
> 87.98.20.98#53: failed to connect: timed out
> 20-Feb-2007 10:24:22.171 info: transfer of 'agir.com/IN' from  
> 87.98.20.98#53: end of transfer
> 
> ________________________________________________
> «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
> Gregober ---> PGP ID --> 0x1BA3C2FD
> bsd @at@ todoo.biz
> ________________________________________________
> «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
> 
> P "Please consider your environmental responsibility before printing  
> this e-mail"
> 
> 
> 
-- 
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742                 INTERNET: Mark_Andrews at isc.org