Notify message from slaves

Fuat Demir (Garanti Teknoloji) FuatD at garanti.com.tr
Wed Mar 3 07:41:44 UTC 2010


Hello 

It is like below, 


options {
Bla
Bla
Bla
	notify no;
Bla
Bla
bla
}; 


I checked notify messages but in also-notify setting for a specific zone does not have any public IP address like 1.1.1.1 or 1.1.1.2...


-----Original Message-----
From: Fuat Demir (Garanti Teknoloji) 
Sent: Wednesday, March 03, 2010 9:28 AM
To: 'Matus UHLAR - fantomas'; bind-users at lists.isc.org
Subject: RE: Notify message from slaves


Hello, 

"Notify no"  statement is in my global conigurations in named.conf under options tab. 


-----Original Message-----
From: bind-users-bounces+fuatd=garanti.com.tr at lists.isc.org [mailto:bind-users-bounces+fuatd=garanti.com.tr at lists.isc.org] On Behalf Of Matus UHLAR - fantomas
Sent: Tuesday, March 02, 2010 4:00 PM
To: bind-users at lists.isc.org
Subject: Re: Notify message from slaves

Hello,

please configure your mailer to wrap lines below 80 characters per line.
72 to 75 is usually OK.

Thank you.

On 02.03.10 14:02, Fuat Demir (Garanti Teknoloji) wrote:
> I have 2 slave 1 master server.
> master is located in different subnet from the slaves.
> Lets say, 10.1.1.1 (ns1) and 10.1.1.2 (ns2) are the real ip addresses of the slaves which have public NAT address for allowing queries from internet for authoritive zones. These public address lets say 1.1.1.1 (ns1) and 1.1.1.2 (ns2).
> In conf file of slaves i have a statement that "notify no".

where? in the options {} statement? in the view {} statements? Or in the zone {} statement for xxx.com?

> When i configured conf file and reconfigure in slaves, i see transfer 
> logs like this,
> 
> in the xfer log of ns1, it says "notify: info: client 1.1.1.2#25998: received notify for zone 'xxx.com'
> 
> in the xfer log of ns2, it says "notify: info: client 1.1.1.1#25998: received notify for zone 'xxx.com'
> 
> Please note that, ns1 recieves notify form the public address of ns2 and ns2 recieves notify from the public address of ns1.
> In both slave server, domain names for ns1 and ns2 are the public addresses of itselves.

check all notify settings in config file. Maybe the one you see is not the one that applies.
--
Matus UHLAR - fantomas, uhlar at fantomas.sk ; http://www.fantomas.sk/
Warning: I wish NOT to receive e-mail advertising to this address.
Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu.
BSE = Mad Cow Desease ... BSA = Mad Software Producents Desease _______________________________________________
bind-users mailing list
bind-users at lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users


This message and attachments are confidential and intended solely for the individual(s) stated in this message. If you received this message although you are not the addressee, you are responsible to keep the message confidential. The sender has no responsibility for the accuracy or correctness of the information in the message and its attachments. Our company shall have no liability for any changes or late receiving, loss of integrity and confidentiality, viruses and any damages caused in anyway to your computer system.  

Bu mesaj ve ekleri, mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve gizlidir. Bu mesajin muhatabi olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin gizliligi ve bu gizlilik yukumlulugune uyulmasi zorunlulugu tarafiniz icin de soz konusudur. Mesaj ve eklerinde yer alan bilgilerin dogrulugu ve guncelligi konusunda gonderenin ya da sirketimizin herhangi bir sorumlulugu bulunmamaktadir. Sirketimiz mesajin ve bilgilerinin size degisiklige ugrayarak veya gec ulasmasindan, butunlugunun ve gizliliginin korunamamasindan, virus icermesinden ve bilgisayar sisteminize verebilecegi herhangi bir zarardan sorumlu tutulamaz.



More information about the bind-users mailing list