Change source IP at outgoing packet send by Bind9 as forwarder.
CpServiceSPb .
cpservicespb at gmail.com
Fri Oct 18 13:10:31 UTC 2019
Thanks for the tip.
Adding
query-source address binded (lan) IP; port 53;
to named.conf.options .....
According to preliminary tests, this is it is !
пт, 18 окт. 2019 г. в 15:41, CpServiceSPb . <cpservicespb at gmail.com>:
> > Have you tried the query-source option? (You might also need
> > transfer-source and notify-source if you are zone any zone transfers.)
>
> Is it applicable in case of forwarding DNS are not mine, as following
> there is no any speaking about zone transfers ?
> For example:
> forwarders {
> 7.7.7.7;
> 8.8.8.8;
> };
>
>
>
>
>
> пт, 18 окт. 2019 г. в 14:14, Tony Finch <dot at dotat.at>:
>
>> CpServiceSPb . <cpservicespb at gmail.com> wrote:
>>
>> > So how is to change Bind9 , what and where is to set up and waht setting
>> > that Bind9 would send forwarding packet via wan interface but would use
>> > address what it is binded to or internal, if it is binded to 127.0.0.1
>> and
>> > 192.168.0.1 ?
>>
>> Have you tried the query-source option? (You might also need
>> transfer-source and notify-source if you are zone any zone transfers.)
>>
>> Tony.
>> --
>> f.anthony.n.finch <dot at dotat.at> http://dotat.at/
>> Sole, Lundy, Fastnet: West 6 to gale 8, veering northwest 4 to 6. Very
>> rough
>> or high. Thundery showers. Moderate or poor.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/bind-users/attachments/20191018/eaf6a5dd/attachment.htm>
More information about the bind-users
mailing list