<div dir="ltr"><div><div><div><div>I think what you are looking for is:<br><br></div>acl test0 { !<a href="http://192.168.1.50/32">192.168.1.50/32</a>; <a href="http://192.168.1.0/24">192.168.1.0/24</a>; };<br><br><a href="http://jodies.de/ipcalc" rel="noreferrer" target="_blank">http://jodies.de/ipcalc</a> is a good resource for checking. (As was mentioned by Reindl...)<br><br></div>Learning basic sub-netting of IP addresses (Both IPv4 and IPv6) takes time but it's necessary for DNS configuration. There's plenty of other resources out there. (Try googling sub-netting with or without the hyphen)<br><br></div>Hope that helps,<br><br></div>Bob<br><br>> Message: 1<br>> Date: Sat, 8 Oct 2016 15:14:36 +0200<br>
> From: Pol Hallen <<a href="mailto:bindml@fuckaround.org">bindml@fuckaround.org</a>><br>
> To: Bind Users <<a href="mailto:bind-users@lists.isc.org">bind-users@lists.isc.org</a>><br>> Subject: acl<br>> Message-ID: <<a href="mailto:fb1d9827-71ee-ff59-4d2c-9262c8cd9ca5@fuckaround.org">fb1d9827-71ee-ff59-4d2c-<wbr>9262c8cd9ca5@fuckaround.org</a>><br>> Content-Type: text/plain; charset=utf-8; format=flowed<br>
><br>
> Hi all :-)<br>
><br>
> can someone advice me about a fully howto / handbook to understand ACL?<br>
><br>
> I need to permit all network 192.168.1/24 and deny <a href="http://192.168.1.50/24" rel="noreferrer" target="_blank">192.168.1.50/24</a> host:<br>
><br>
> acl test0 { !<a href="http://192.168.1.50/24" rel="noreferrer" target="_blank">192.168.1.50/24</a>; 192.168.1/24;};<br>
><br>
> thanks for help!<br>
><br>
> Pol<br><div><div><br></div></div></div>