BIND 10 #2173: AUTH_COMMAND_FAILED execution of command channel instruction 'loadzone' failed: There's no client list for class IN

[BIND 10 Development]

#2173: AUTH_COMMAND_FAILED execution of command channel instruction 'loadzone'
failed: There's no client list for class IN
-------------------------------------+-------------------------------------
                   Reporter:  shane  |                 Owner:
                       Type:         |                Status:  new
  defect                             |             Milestone:  Next-Sprint-
                   Priority:         |  Proposed
  medium                             |            Resolution:
                  Component:         |             Sensitive:  0
  Unclassified                       |           Sub-Project:  DNS
                   Keywords:         |  Estimated Difficulty:  0
            Defect Severity:  N/A    |           Total Hours:  0
Feature Depending on Ticket:         |
        Add Hours to Ticket:  0      |
                  Internal?:  0      |
-------------------------------------+-------------------------------------
Description changed by shane:

Old description:

> I got the following messages from my authoritative server:
>
> 2012-08-01 14:00:52.821 INFO  [b10-auth.auth] AUTH_SERVER_STARTED server
> started
> 2012-08-01 14:00:52.913 INFO  [b10-stats.stats] STATS_STARTING starting
> 2012-08-01 14:09:25.006 ERROR [b10-auth.auth] AUTH_COMMAND_FAILED
> execution of command channel instruction 'loadzone' failed: There's no
> client list for class IN
> 2012-08-01 15:08:19.763 ERROR [b10-auth.auth] AUTH_COMMAND_FAILED
> execution of command channel instruction 'loadzone' failed: There's no
> client list for class IN
>
> It is set up as a secondary, but not using the in-memory data source. I
> think that is the problem.
>
> Either we should not send loadzone commands from... zonemgr? xfrin? Or we
> should handle the case where we have no zones in auth.

New description:

 I got the following messages from my authoritative server:

 {{{
 2012-08-01 14:00:52.821 INFO  [b10-auth.auth] AUTH_SERVER_STARTED server
 started
 2012-08-01 14:00:52.913 INFO  [b10-stats.stats] STATS_STARTING starting
 2012-08-01 14:09:25.006 ERROR [b10-auth.auth] AUTH_COMMAND_FAILED
 execution of command channel instruction 'loadzone' failed: There's no
 client list for class IN
 2012-08-01 15:08:19.763 ERROR [b10-auth.auth] AUTH_COMMAND_FAILED
 execution of command channel instruction 'loadzone' failed: There's no
 client list for class IN
 }}}

 It is set up as a secondary, but not using the in-memory data source. I
 think that is the problem.

 Either we should not send loadzone commands from... zonemgr? xfrin? Or we
 should handle the case where we have no zones in auth.

--

-- 
Ticket URL: <http://bind10.isc.org/ticket/2173#comment:1>
BIND 10 Development <http://bind10.isc.org>
BIND 10 Development