BIND 10 #2450: Document that we sometimes need ldconfig after install

[BIND 10 Development]

#2450: Document that we sometimes need ldconfig after install
-------------------------------------+-------------------------------------
                   Reporter:  shane  |                 Owner:  jreed
                       Type:  task   |                Status:  reviewing
                   Priority:         |             Milestone:
  medium                             |  Sprint-20121204
                  Component:         |            Resolution:
  documentation                      |             Sensitive:  0
                   Keywords:         |           Sub-Project:  Core
            Defect Severity:  High   |  Estimated Difficulty:  3
Feature Depending on Ticket:         |           Total Hours:  0
  alpha2                             |
        Add Hours to Ticket:  0      |
                  Internal?:  0      |
-------------------------------------+-------------------------------------
Changes (by muks):

 * owner:  muks => jreed


Comment:

 Hi Jeremy

 Replying to [comment:7 jreed]:
 > It should not be in the quick start guide too. If we try to document
 every issue in the quick start section it will no longer be a "quick
 start" :)

 Removed from quick start guide. :)

 > Also ldconfig is not used on some platforms.

 The instruction says "if required".

 > Also about the "/usr/local" maybe also say "( or under the path used
 with --prefix)". It should not be just /usr/local/ but probably
 /usr/local/lib.

 Updated.

 > In addition, /etc/ld.so.conf may not be the correct file. Some systems
 use different filenames for the linker cache configuration.

 Updated. :)

-- 
Ticket URL: <http://bind10.isc.org/ticket/2450#comment:8>
BIND 10 Development <http://bind10.isc.org>
BIND 10 Development