dhcpserv with Bonding interface
Ian Anderson
Ian.Anderson at clearwire.com
Tue Nov 7 19:35:14 UTC 2006
We are running CentOS 4.4 with DHCP 3.0.4 and are using bonded
interfaces in a master/slave setup. (Used strictly for redundancy) It
runs great.
-----Original Message-----
From: dhcp-users-bounce at isc.org [mailto:dhcp-users-bounce at isc.org] On
Behalf Of Sameh Attia
Sent: Tuesday, November 07, 2006 3:39 AM
To: dhcp-users at isc.org
Subject: Re: dhcpserv with Bonding interface
We have CentOS 4.4 with DHCP running on a bonded interface and the
bonding
mode is round-robin (balance-rr) and not the ieee 802.3ad link
aggregation.
It is working fine and is very stable.
On 11/7/06, John Abbott <abbottj at stgeorge.com.au> wrote:
>
> thanks David, I can convince them to drop etherchannel now.
> >>> "David W. Hankins" <David_Hankins at isc.org> 11/07/06 10:26 AM >>>
> On Tue, Nov 07, 2006 at 09:55:54AM +1100, John Abbott wrote:
> > Having a little trouble with a new dhcp server setup to failover,
the
> > primary server in remote site uses a bonding interface ( please
don't
> > ask why ). It seems from my lowly technical ability that dhcp has a
> prob
> > binding to the bond0 device ( 2 x 1Gig Ether ), has this been
> discussed
> > before or anyone have experience using dhcp and etherchannel type
> > devices on linux?
>
> I've never heard of anyone making this work.
>
> But then again, people tend not to tell us when things work.
>
>
> The DHCP software has to use BPF sockets on the interfaces in
> question, and it throws out kinds of interfaces it doesn't
> understand...in terms of link layer framing. Since we use BPF, we
> also have to do our own link layer, IP, UDP, and finally bootp/DHCP.
>
> --
> David W. Hankins"If you don't do it right the first time,
> Software Engineeryou'll just have to do it again."
> Internet Systems Consortium, Inc.-- Jack T. Hankins
>
>
>
> **********************************************************************
> ***** IMPORTANT INFORMATION *****
> This document should be read only by those persons to whom it is
> addressed and its content is not intended for use by any other
> persons. If you have received this message in error, please notify
> us immediately. Please also destroy and delete the message from
> your computer. Any unauthorised form of reproduction of this message
> is strictly prohibited.
>
> St George Bank Limited AFSL 240997, Advance Asset Management Limited
> AFSL 240902, St George Life Limited AFSL 240900, ASGARD Capital
> Management Limited
> AFSL 240695 and Securitor Financial Group Limited AFSL 240687 is not
> liable for
> the proper and complete transmission of the information contained in
> this communication, nor for any delay in its receipt.
> **********************************************************************
>
>
>
>
>
More information about the dhcp-users
mailing list