DHCP in NAT in a VM Guest and a Mac Host
penguindeb at gmail.com
Tue Jul 1 15:02:42 UTC 2008
Well. I have DNS in the same Guest and now trying to run DHCP.
Wouldn't that be too much for one guest? BIND is actully running
nicely in the VM.
When I "tail -f /var/log/messages", i get the exact same message from
/var/log/messages. On the top of that when I start DHCP it fails on
BIND running on that guest which is set up on a NAT, wouldn't that
cause me a problem to run DHCP. They might be using the only NIC
available from the HOST which is my MAC?
2008/7/1 Romer Ventura <rventura at h-st.com>:
> Not the case. They should work just fine. I run the same setup with Vmware
> and I have VMGuest that is the DHCP and other Guest as the DNS.
> Do "tail -f /var/log/messages" and start the dhcp and see the errors that
> come up.
> On 7/1/08 9:22 AM, "stephane lepain" <penguindeb at gmail.com> wrote:
>> Hi All,
>> I come to you as I am really stuck.
>> I am running a VM under Ubuntu server. I have already installed BIND
>> that works very nicely but DHCP is just not doing it:)
>> When I launch the server in my VM, it says that it fails to start.
>> When I go into /var/log/messages to check for error messages, I don't
>> get much to work with.
>> " anaconda dhcpd: wrote 0 deleted host decls to leases file"
>> " anaconda dhcpd: wrote 0 new dynamic host decls to lease file"
>> "anaconda dhcpd: wrote 0 leases to leases file
>> May be I should be looking somewhere else for error message but I
>> don't where. I have set up my DNS to be authoritative on my network. I
>> was wondering since the VM is as well using a DHCP Server, wouldn't
>> they collide with each other?
>> Cheers to all for your help
> Romer Ventura
> Network Administrator
> Houston-Sigma Technologies, L.P.
> 1333 Industrial Blvd. Sugar Land Tx. 77478
> Voice 281-295-5017
> rventura at h-st.com
More information about the dhcp-users