Restricting ONT's Ethernet port to singe active IP address

[Frank Bulk]

I exchanged e-mails with our Calix SE folk this morning and they didn't say
anything about profiles restricting number of addresses.

We're using a C7 with R6.0.x.  Can you point me to that option?  IIRC, the
FiberDrive does support that.

Frank

-----Original Message-----
From: mschober at nts-online.net [mailto:mschober at nts-online.net] 
Sent: Wednesday, April 22, 2009 3:44 PM
To: frnkblk at iname.com; Users of ISC DHCP
Cc: 'Jerimiah Cole'
Subject: RE: Restricting ONT's Ethernet port to singe active IP address

<snip>

I'm not sure what you're using for the FTTH transport, but there's usually
a way to limit this in the transport equipment.  We use the FiberDrive
500, F5, and C7 Calix/OSI, and there are profiles that we configure for
DHCP that sets the number of addresses we allow to be pulled by the NID. 
As an aside, we set ours to 1 more than the customer needs so our field
techs can plug in and test without our intervention to clear leases.

Milton Schober, Jr.
NTS Communications, Inc.