Reconfig of dhcp.conf
carnold at electrichendrix.com
Wed Nov 25 13:32:48 UTC 2009
On 11/25/09 1:12 AM, "Glenn Satchell" <Glenn.Satchell at uniq.com.au> wrote:
> Hi Chris
> Do you still have a shared network with 192.168.123.0 and 192.168.124.0
> on the same physical segment?
No sir, they are not on the same physical segment
> If not then your new config should be fine, and hosts on each of the
> physical networks will get addresses in that range.
Nothing on any subnet is getting ip's. Is there a dhcp log I can take a look
at? I have opened dhcp-relay ports (67 and 68) from both the dmz to trust
and trust to dmz to no avail. The dhcp server is on the dmz network. This
server has dual nic's and each nic has a different ip/subnet. Ex. eth0
192.168.124.x with gateway of 192.168.124.x and eth1 192.168.123.x with
gateway of 192.168.123.x. I have also, on the juniper firewall, enabled
dhcp-relay on the interfaces (dmz and trust).
More information about the dhcp-users