Multiple dhcrelay setup causing multiple duplicate DHCP requests
dhcp1 at thehobsons.co.uk
Mon Aug 16 11:44:13 UTC 2010
Can you sniff the network traffic and see exactly what's going on ?
You should be getting just ONE packet per client request per relay
agent on the clients network. So normally you'd two packets per
client request if you run two relay agents on a network.
I'm guessing you may be getting a broadcast storm - each relay agent
is picking up relayed packets from the other and throwing them back
again. Does dhcrelay us unicast or broadcast packets to the server ?
I've not used dhcrelay myself, but in the man page it has :
>The relay agent should not relay packets received on a physical
>network to DHCP servers on the same physical network - if they do,
>the server will receive duplicate packets. In order to fix this,
>however, the relay agent needs to be able to learn about the network
>topology, which requires that it have a configuration file.
Also, can you elaborate on the network topology a bit. Looking back I
see you gave the topology as :
> [ dhcpd1 ]
> [ fw1/dhcrelay ]
> [ fw2/dhcrelay ]
> [ dhcpd2 ]
That doesn't look right to me - you have two networks that are
apparently on VLAN120. If it's the same VLAN120 in each case, then I
think you may well have a loop as far as DHCP requests go.
Visit http://www.magpiesnestpublishing.co.uk/ for books by acclaimed
author Gladys Hobson. Novels - poetry - short stories - ideal as
Christmas stocking fillers. Some available as e-books.
More information about the dhcp-users