Upgrade from 3.1.0 to 4.1.1
dhcp1 at thehobsons.co.uk
Wed Mar 3 08:23:17 UTC 2010
Abu Abdulla alhanbali wrote:
>O.K. I tried now with 2 NIC but i got this error:
>Multiple interfaces match the same subnet: nxge0 nxge1
>Multiple interfaces match the same shared network: nxge0 nxge1
>i have two interfaces (IPs) in the same subnet.
>nxge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
> inet 188.8.131.52 netmask fffffff8 broadcast 184.108.40.206
> ether 0:14:4f:f3:32:cc
>nxge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
> inet 220.127.116.11 netmask fffffff8 broadcast 18.104.22.168
> ether 0:14:4f:f3:32:cd
>do i really need to have different Vlan for each interface to make the
>dhcp works? i only require the server for remote users (not on the
I thought the aim was to run TWO instances of DHCP server - that
being the case, start on on nxge0 and the other on nxge1. The 'raw'
command would be :
dhcpd <options> nxge0
dhcpd <options> nxge1
Your distro probably has tools for setting the interface(es) in a
config file, but won't have config options for two independent
WANTED: "Software CD ROM Kit" for Canon CLBP 360-PS printer (Canon
part no RH6-3612, or possibly RH6-3810, or RH6-3610 might do). I've a
dead HD and need this CD so I can replace the disk and re-install the
printer OS on it.
This is NOT the same thing as the printer drivers to load on the
computer - there's no problem there.
If anyone knows where I might get hold of one I'd be grateful -
requests to Canon drew a blank, it's been out of support for years.
Alternatively, if anyone has one of these and would let me image
their hard disk ...
Visit http://www.magpiesnestpublishing.co.uk/ for books by acclaimed
author Gladys Hobson. Novels - poetry - short stories - ideal as
Christmas stocking fillers. Some available as e-books.
More information about the dhcp-users