Upgrade from 3.1.0 to 4.1.1
Abu Abdulla alhanbali
montaqa at gmail.com
Thu Mar 4 04:05:17 UTC 2010
Can i assume that the dhcp (without patching) cannot work on two
different physical interfaces (NIC) in the same vlan?
On Wed, Mar 3, 2010 at 12:39 PM, Abu Abdulla alhanbali
<montaqa at gmail.com> wrote:
> On Wed, Mar 3, 2010 at 12:23 PM, Simon Hobson <dhcp1 at thehobsons.co.uk> wrote:
>> Abu Abdulla alhanbali wrote:
>>> O.K. I tried now with 2 NIC but i got this error:
>>> Multiple interfaces match the same subnet: nxge0 nxge1
>>> Multiple interfaces match the same shared network: nxge0 nxge1
>>> i have two interfaces (IPs) in the same subnet.
>>> nxge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
>>> inet 126.96.36.199 netmask fffffff8 broadcast 188.8.131.52
>>> ether 0:14:4f:f3:32:cc
>>> nxge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
>>> inet 184.108.40.206 netmask fffffff8 broadcast 220.127.116.11
>>> ether 0:14:4f:f3:32:cd
>>> do i really need to have different Vlan for each interface to make the
>>> dhcp works? i only require the server for remote users (not on the
>>> local subnet).
>> I thought the aim was to run TWO instances of DHCP server - that being the
>> case, start on on nxge0 and the other on nxge1. The 'raw' command would be :
>> dhcpd <options> nxge0
>> dhcpd <options> nxge1
>> Your distro probably has tools for setting the interface(es) in a config
>> file, but won't have config options for two independent servers.
> yes i'm trying to run two instances right now:
> dhcpd <options> nxge0 (it works fine)
> dhcpd <options> nxge1 (it didn't work and
> through the previous error of "Multiple interfaces ...")
> i thought it should work without any issue since there are two
> different physical interfaces. am i missing something.
More information about the dhcp-users