DHCPv6 Client Configuration

[Luca]

you mean i must pick a global address for the relay matching the server
subnet?

(example: dhcrelay -I -l 2001:760:2e04:f001::3%eth0 -u
2001:760:2e04:f001::2%eth0  ??)


Thanks for reply

2011/10/22 Bjørn Mork <bjorn at mork.no>

> Luca <luca.bahamut at gmail.com> writes:
>
> > for Client i am using:
> >
> > dhcrelay -I -l eth0 -u 2001:760:2e04:f001::2%eth0
> >
> > ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:02:A5:4B:8C:56 inet6
> addr:
> > fe80::202:a5ff:fe4b:8c56/64 Scope:Link UP BROADCAST RUNNING PROMISC
> > MULTICAST MTU:1500 Metric:1 RX packets:16689 errors:0 dropped:0
> overruns:0
> > frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0
> > txqueuelen:1000 RX bytes:2350223 (2.2 MiB) TX bytes:67508 (65.9 KiB)
> >
> >
> > when i start the relay agent i get:
> >
> > Listening on Socket/eth0
> > Sending on   Socket/eth0
> > Can't find link address for interface 'eth0'.
>
> The relay agent must have an address with a matching scope, or it cannot
> communicate with the server.  I.e. you must either use a link local
> address for the server, or allocate a global address for the relay.
>
>
> Bjørn
> _______________________________________________
> dhcp-users mailing list
> dhcp-users at lists.isc.org
> https://lists.isc.org/mailman/listinfo/dhcp-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20111022/fbd48bcb/attachment.html>