Network Address getting assigned to client and ping not working (ver 4.2.2)
sai.mukund.sagar at gmail.com
Tue Apr 24 14:31:29 UTC 2012
Thanks for clarifying my doubt.
I have one query here.
If my subnet is say 188.8.131.52/16
and in range if i specify
range 184.108.40.206 220.127.116.11;
Then 18.104.22.168 , 22.214.171.124 , 126.96.36.199 188.8.131.52 or 184.108.40.206 are part of this
range. Will have to explicitly exclude all the addresses from this range ?
That would be so many addresses to exclude.
And if we were to exclude the .0 's and .255's it would be many ranges we
would end up specifying.
Please correct me if I am wrong.
On Tue, Apr 24, 2012 at 7:40 PM, Flex Banana <flex.banana at bluewin.ch> wrote:
> I think you can not use .0 as host address.
> We have a lot of /23 subnet and never a .0 will be assigned.
> Best regards
> On Apr 24, 2012, at 3:59 PM, Peter Rathlev wrote:
> If you want to use 220.127.116.11 as a host address (on ethernet) you need to
> use 18.104.22.168/23 or larger where it would be valid.
> dhcp-users mailing list
> dhcp-users at lists.isc.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the dhcp-users