Query in Relay IPv6 ??

ameen.shajahan at wipro.com ameen.shajahan at wipro.com
Wed May 9 12:27:46 UTC 2012


Hi,
                If anybody knows for the below query, please respond.


Hi ,
                Consider the scenario below for IPv6 relay.

                Server(eth0)---------------------eth1---------------------Relay-----------------eth0-----------------Client(windows 7PC)
3ffe:501:ffff:100::/64                                                      3ffe:501:ffff:101::/64
In server side:

# ./dhcpd -6 -d -cf /etc/dhcpd-dhcpv6.conf -lf /var/db/dhcpd6.leases eth0
Internet Systems Consortium DHCP Server 4.2.3
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Wrote 0 leases to leases file.
Bound to *:547
Listening on Socket/5/eth0/3ffe:501:ffff:100::/64
Sending on   Socket/5/eth0/3ffe:501:ffff:100::/64                                             (No response from server side)



In relay side:
# ./dhcrelay -6 -d -I -l eth0 -u eth1
Internet Systems Consortium DHCP Relay Agent 4.2.3
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Bound to *:547
Listening on Socket/eth1
Sending on   Socket/eth1
Listening on Socket/eth0
Sending on   Socket/eth0
Relaying Solicit from fe80::c8b0:62f6:fd72:7074 port 546 going up.
send_packet6: Cannot assign requested address
Relaying Solicit from fe80::c8b0:62f6:fd72:7074 port 546 going up.
send_packet6: Cannot assign requested address
Relaying Solicit from fe80::c8b0:62f6:fd72:7074 port 546 going up.
send_packet6: Cannot assign requested address
Relaying Solicit from fe80::c8b0:62f6:fd72:7074 port 546 going up.
send_packet6: Cannot assign requested address
Relaying Solicit from fe80::c8b0:62f6:fd72:7074 port 546 going up.

In client side:

C:\Windows\System32>ipconfig /renew6

Windows IP Configuration

An error occurred while renewing interface Local Area Connection 5 : The semapho
re timeout period has expired.




What could be the problem.
Is this the correct way of configuration?
Please let me know

Please do not print this email unless it is absolutely necessary. 

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 

www.wipro.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20120509/ac446a11/attachment.html>


More information about the dhcp-users mailing list