dhcrelay listen at all ifs but should only on dedicated ifs

[IMMO WETZEL]

Just checked the mail I sent before. There is an IP on that bridge too


36: br_TB104_DPU: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 42:b9:9b:1e:1c:c9 brd ff:ff:ff:ff:ff:ff
    inet 10.160.60.49/28<http://10.160.60.49/28> brd 10.160.60.63<http://10.160.60.63/> scope global br_TB104_DPU
       valid_lft forever preferred_lft forever
    inet6 fe80::40b9:9bff:fe1e:1cc9/64 scope link
       valid_lft forever preferred_lft forever


Sent from Mobile

-------- Original message --------
From: Patrick Cervicek
Date:11/01/2018 17:50 (GMT+01:00)
To: Users of ISC DHCP
Subject: Re: dhcrelay listen at all ifs but should only on dedicated ifs

> My start line is
> # dhcrelay -4 -d -iu br_TB104_TMN -id br_TB104_DUT 10.160.50.50
> But dhcrelay is listen on all if´s like I specified nothing specific

Your provided output shows, that br_TB104_TMN has an IP address, but
interface br_TB104_DUT does not. Please configure an IP address for
br_TB104_DUT and try again.



_______________________________________________
dhcp-users mailing list
dhcp-users at lists.isc.org
https://lists.isc.org/mailman/listinfo/dhcp-users<https://lists.isc.org/mailman/listinfo/dhcp-users>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20180111/83a76679/attachment.html>