Script execution failed with return value 2

[William Torrez Corea]

On Sat, Sep 7, 2024 at 5:44 AM <glenn.satchell at uniq.com.au> wrote:

> enp8s0 is an ethernet interface, do you have an ethernet cable connecting
> your computer to the router? Are the lights on the ethernet port indicating
> a link or any activity?
>
> If you access the WIFI router using WIFI then you need to access that
> through the WIfi settings on your computer. It shows up with a different
> port name.
>
> --


I have the following interfaces:

DEVICE          TYPE      STATE                   CONNECTION
wlp6s0          wifi      connected               CLARO1_E2440E
lo              loopback  connected (externally)  lo
p2p-dev-wlp6s0  wifi-p2p  disconnected            --
enp7s0          ethernet  unmanaged               --

The interface enp7s0 is connected sometimes but then loses the connection.

>> do you have an ethernet cable connecting your computer to the router?

Yes, i am using a cable UTP CAT5e and an Ethernet Switch Naxos100
10/100Mbps 8-Port

>> Are the lights on the ethernet port indicating a link or any activity?

I don't have any light on the ethernet port, router nor Ethernet Switch
indicating a link or any activity.

With kindest regards, William.

*Larry Wall invented a messy programming language -- and changed the face
of the Web*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/dhcp-users/attachments/20240908/db5f527b/attachment.htm>