<br><font size=2 face="sans-serif">Hi,</font>
<br><font size=2 face="sans-serif">   I have a situation where
I have setup a subnet with DCHP relay...ie....A Cisco router in this case
with the subnet interface config'd with the IP-helper command pointing
to a DHCP server on another subnet.   I fire up my XP-SP2 laptop which
starts looking for an IP address.  The 'remote' DHCP server sees the
DHCPdiscover come in and sends out a DHCPoffer which is broadcast out to
the originating subnet.   My XP-SP2 machine sees the broadcast (which
carries the laptops MAC address buried in the Bootstrap Protocol portion
of the frame) but ignores it...ie...it does not send a DHCPrequest back.
  However, when I plug a MAC (Leopard) laptop or a LINUX laptop into
the same port....they negotiate a  DHCP address with no problem.  
Now, when I plug my XP-SP2 laptop into another subnet which also uses DHCP-relay
but points to a different DHCP server.....it works fine!   However,
in this case the DHCPoffer is unicast specifically to the laptops MAC....ie....not
broadcast.  .   I would think that any client that sees a broadcast
frame with their MAC in the Bootstrap Protocol should respond.   Should
DHCPoffers be unicast or broadcast or both?? Can someone point me in a
direction to start looking?....I'm not sure if this is a Windows issue,
a DHCP server issue or some networking issue. </font>
<br>
<br><font size=2 face="sans-serif">.........thanks in advance............J</font>
<br>
<br><font size=2 face="sans-serif">James Savage        
                     
    York University           <br>
Senior Communications Tech.       108 Steacie Building<br>
jsavage@yorku.ca                
           4700 Keele Street<br>
ph: 416-736-2100 ext. 22605            Toronto,
Ontario<br>
fax: 416-736-5701                
               M3J 1P3, CANADA
</font>