<div dir="ltr"><div><div><div><div><div><div><div><div><div>I've got a failing dhcp failover partner. (the partner is a HA cluster and both nodes are being RMAed. Long story)<br><br></div>My question is this. Is the following procedure ok for the replacement? (I've already confirmed the new version of DHCP is exactly the same as the old one)<br><br></div>1) before shutting down the failing partner cluster, stop DHCP and save the dhcpd.leases file and the DHCPD.conf file.<br></div>2) shut down the failing partner cluster completely.<br></div>3) bring up the replacement partner cluster while leaving DHCPD turmed off.<br></div>4) restore the DHCPD.leases and DHCPD.conf files.<br></div>5) restart DHPCD on the replacement partner cluster.<br><br></div>My contention is that this will result in the failover pair going into partner-interrupted state for about 5 or 10 minutes while the HA cluster is replaced and then should restart communications as if nothing happened when the replacement partner comes live. Thoughts?<br><br></div>Regards,<br><br></div>Bob<br></div>