<div dir="ltr"><div><div><div><div><div><div>Hi.<br><br></div>I am experiencing an interesting problem with DHCP client timeouts.<br></div>When the system boots up it set its date/time, starts DHCP client and NTP client.<br></div>Only after the DHCP client interface is configured, the NTP client is able to access<br></div>the NTP server.<br></div>In my case, when NTP client adjusts the date/time it is set 12 hours back because<br></div><div>of different time zone.<br></div><div>I have set a short lease time and noted, that from that point on, there is no renew<br>requests initiated by the client.<br><br></div><div>So, I wonder, is it possible that instead of after 15 seconds the client will try to<br></div><div>renew in 12 hours and 15 seconds since the time has been set 12 hours in the<br></div><div>past?<br><br></div><div>Example (timeout calculation is just as an example):<br></div><div>1. bootup, system time Aug 8 02:00:00pm<br></div><div>2. start DHCP client acquire IP at Aug 8 02:01:00pm<br>    calculated renew on Aug 8 02:01:15pm<br></div><div>3. NTP at 02:01:05PM sets system time to Aug 8 02:01:05AM<br></div><div>4. DHCP client waits nearly 12 hours until system time is Aug 8 02:01:15pm again<br></div><div><br></div><div>I will look at the source code, but just like to ask if someone knows if this is<br></div><div>how it should behave or maybe I am missing something (configuration etc.).<br><br></div><div>Thank you very much in advance.<br><br></div><div>RegK<br></div></div>