[kea-dev] hooks libraries failed to validate
Marcin Siodelski
marcin at isc.org
Fri Sep 18 12:56:55 UTC 2015
You may want to check in this location:
/usr/local/src/kea-0.9.2/src/hooks/dhcp/user_chk/.libs/libdhcp_user_chk.so
Marcin
On 18.09.2015 14:49, Raj raj wrote:
> Hi,
>
> Tried that, still getting the same error:
>
> 2015-09-18 18:16:28.225 ERROR [kea-dhcp4.dhcp4/16233] DHCP4_INIT_FAIL
> failed to initialize Kea server: configuration error using file
> '/usr/local/etc/kea/kea.conf': hooks libraries failed to validate -
> library or libraries in error are:
> /usr/local/src/kea-0.9.2/src/hooks/dhcp/user_chk/libdhcp_user_chk.so
> (/usr/local/etc/kea/kea.conf:25:21)
>
> Please note that as I mentioned in previous mail libdhcp_user_chk.so
> does not exist and make does not create that file.
>
> root at mars:~# ls
> /usr/local/src/kea-0.9.2/src/hooks/dhcp/user_chk/libdhcp_user_chk.so
> ls: cannot access
> /usr/local/src/kea-0.9.2/src/hooks/dhcp/user_chk/libdhcp_user_chk.so:
> No such file or directory
>
>
> Thanks and Regards,
>
> Raj
>
>
> On Fri, Sep 18, 2015 at 5:16 PM, Marcin Siodelski <marcin at isc.org> wrote:
> > Raj,
> >
> > Please load the .so file, instead of .la file in your config.
> >
> > Marcin Siodelski
> > DHCP Software Engineer
> >
> > On 18.09.2015 13:29, Raj raj wrote:
> >> One more update on this:
> >>
> >> I tried to compile the user_chk sample hook that came with the source.
> >> It did not produce an .so file as I had expected, instead it produced
> >> libdhcp_user_chk.la
> >>
> >> make[3]: Entering directory
> `/usr/local/src/kea-0.9.2/src/hooks/dhcp/user_chk'
> >> CXX libduc_la-load_unload.lo
> >> CXX libduc_la-pkt_receive_co.lo
> >> CXX libduc_la-pkt_send_co.lo
> >> CXX libduc_la-subnet_select_co.lo
> >> CXX libduc_la-user.lo
> >> CXX libduc_la-user_chk_log.lo
> >> CXX libduc_la-user_file.lo
> >> CXX libduc_la-user_registry.lo
> >> CXX libduc_la-version.lo
> >> CXX libduc_la-user_chk_messages.lo
> >> CXXLD libduc.la
> >> CCLD libdhcp_user_chk.la
> >> make[3]: Leaving directory
> `/usr/local/src/kea-0.9.2/src/hooks/dhcp/user_chk'
> >>
> >> I tried loading the libdhcp_user_chk.la file and it also gave me
> similar error:
> >>
> >> 2015-09-18 16:51:42.333 ERROR [kea-dhcp4.dhcp4/15637] DHCP4_INIT_FAIL
> >> failed to initialize Kea server: configuration error using file
> >> '/usr/local/etc/kea/kea.conf': hooks libraries failed to validate -
> >> library or libraries in error are:
> >> /usr/local/src/kea-0.9.2/src/hooks/dhcp/user_chk/libdhcp_user_chk.la
> >> (/usr/local/etc/kea/kea.conf:25:21)
> >>
> >> Thanks and Regards,
> >>
> >> Raj
> >>
> >>
> >> On Fri, Sep 18, 2015 at 3:59 PM, Raj raj <rajlistuser at gmail.com> wrote:
> >>> Dear List,
> >>>
> >>> My example module is now compiling without errors. But when I restart
> >>> Kea daemon to load the module it exits with following error:
> >>>
> >>> 2015-09-18 15:30:29.202 ERROR [kea-dhcp4.dhcp4/14052] DHCP4_INIT_FAIL
> >>> failed to initialize Kea server: configuration error using file
> >>> '/usr/local/etc/kea/kea.conf': hooks libraries failed to validate -
> >>> library or libraries in error are:
> >>> /usr/local/src/dhcp-alert/example.so
> >>> (/usr/local/etc/kea/kea.conf:24:21)
> >>>
> >>> I get this error when I enable the logging line:
> >>>
> >>> LOG_ERROR(packet_capture_logger, HOOK_TEST_MSG);
> >>>
> >>> in load_unload.cc. If this line is commented out Kea starts with
> out error.
> >>>
> >>> There is no further information in logs as to what could be the error
> >>> here. Is there a way to increase debug level of module loading? How to
> >>> figure out what could be wrong in the module?
> >>>
> >>> Thanks and Regards,
> >>>
> >>> Raj
> >> _______________________________________________
> >> kea-dev mailing list
> >> kea-dev at lists.isc.org
> >> https://lists.isc.org/mailman/listinfo/kea-dev
> >>
> _______________________________________________
> kea-dev mailing list
> kea-dev at lists.isc.org
> https://lists.isc.org/mailman/listinfo/kea-dev
>
More information about the kea-dev
mailing list