[Kea-users] No 2.6.5 for Debian Trixie amd64?

[Stefan G. Weichinger]

Am 15.05.26 um 19:58 schrieb Darren Ankney:
> Hi Stefan,
> 
> Good to hear that it is all working now.  must have just been some
> delay earlier in the green lights.  It can take some time before the
> HA shows up correctly after restarting or changing configuration.
> 
> Have a great weekend!

Thanks! Rainy, so I upgraded a second cluster ;-)

Two follow-up questions:

The first cluster (which we were talking about so far) has Stork enabled.

Stork contains some Checkers, and I get this warning:

" The daemon [17] DHCPv4 has enabled High Availability hook configured 
to use dedicated HTTP listeners but the connections to the HA 'adc2' 
peer with the 'http://10.0.0.230:8000/' URL are performed over the Kea 
Control Agent omitting the dedicated HTTP listener of this peer. It may 
cause the bottlenecks that nullify any performance gains offered by 
HA+MTYou need to set the peer's HTTP '8000' port to the dedicated 
listener's port. "

I assume I'd have to change the ports in the section for configuring 
libdhcp_ha.so ?

But so far everything works and I also assume that I won't hit any 
performance limits with 4 small /24 subnets (?)


Second cluster doesn't have stork: so I watch the journalctl output and 
think it's fine when both nodes go into HOT-STANDBY mode.

Are there any CLI-commands to actually check that IPs are assigned 
correctly etc ?

I am not on site and can't test with a client right now.

Thanks a lot, enjoy the rest of the weekend as well.