<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">Hi<br>
<br>
Problem resolved, on Linuxmint 20 configuring IPv6 as automatic,
addresses only results in the client obtaining an IPv6 address
which is ::/128, however it is possible to ping6 any device in the
::/64 subnet. Thanks for pointing out about what should be learnt
from RA rather than DHCP. I mistakingly thought RA was only used
to indicate that DHCP was to be used.<br>
<br>
Thanks<br>
<br>
Russell<br>
<br>
On 02/03/2021 11:35, russell aspinwall wrote:<br>
</div>
<blockquote type="cite"
cite="mid:214018a0-64c5-bd1d-a7fe-a8ed2fed1666@willows7.myzen.co.uk">
<div class="moz-cite-prefix">Hi<br>
<br>
95% of the devices have fixed IPv4 and IPv6 addresses and are
working perfectly. DHCPv4 is also working perfectly for the
small number of devices that need it.<br>
DHCPv6 is working, clients are being assigned an IP address from
the correct pool but with a ::/128 address but are unable to
communicate with any other IPv6 device on the network.<br>
<br>
I have used wireshark to capture the RA from the pfsense
firewall<br>
<br>
ICMPv6<br>
Managed address configuration: Set<br>
Other Configuration : Set<br>
Home Agent : Not Set<br>
Prf (Default Router Preference): Medium (0)<br>
Proxy : Not Set<br>
Reserved : 0<br>
ICMPv6 Option (Prefix information : NNNN::/64
) subnet is correct<br>
ICMPv6 Option (Route Information : Medium ::/0) <br>
ICMPv6 Option (Recursive DNS Server NNNN:::AAAA)
dns server is correct<br>
ICMPv6 Option (DNS Search List Option euclid.plato )
dns search is correct<br>
ICMPv6 Option (MTU :1492)<br>
ICMPv6 Option (Source link-layer : pfsense LAN mac)<br>
<br>
What I am missing that is stopping the DHCPv6 (Linuxmint 20)
from correctly assigning the ::/64 netmask which is identified
in the ICMPv6 Prefix Information Option instead of the ::/128
netmask which it is actually using?<br>
<br>
Thanks<br>
<br>
Russell<br>
<br>
<br>
On 01/03/2021 21:08, Gibbins, John (IM&T, Black Mountain)
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:SYCPR01MB3502FD82DCFA39F8E0537876F39A9@SYCPR01MB3502.ausprd01.prod.outlook.com">
<meta name="Generator" content="Microsoft Word 15 (filtered
medium)">
<div class="WordSection1">
<p class="MsoNormal"><span>Hi Russell,</span></p>
<p class="MsoNormal"><span> </span></p>
<p class="MsoNormal"><span>Is this a problem? Our systems
running with the old ISC DHCP server report /128 on Ubuntu
boxes for addresses handed out by DHCPv6 even though link
local addresses appear as /64.</span></p>
<p class="MsoNormal"><span>In a sense all host addresses are
/128 entries. The important thing is that the routing
table includes a route for the /64 block containing the
address. As long as that is there your system should work
properly. That should be learnt from the RA rather than
DHCP.</span></p>
<p class="MsoNormal"><span> </span></p>
<p class="MsoNormal"><span>Regards</span></p>
<p class="MsoNormal"><span>johng</span></p>
<p class="MsoNormal"><span> </span></p>
<div>
<div>
<p class="MsoNormal"><b><span lang="EN-US">From:</span></b><span
lang="EN-US"> Kea-users <a
class="moz-txt-link-rfc2396E"
href="mailto:kea-users-bounces@lists.isc.org"
moz-do-not-send="true"><kea-users-bounces@lists.isc.org></a>
<b>On Behalf Of </b>russell aspinwall<br>
<b>Sent:</b> Tuesday, 2 March 2021 7:32 AM<br>
<b>To:</b> Torbjörn Eklöv <a
class="moz-txt-link-rfc2396E"
href="mailto:torbjorn.eklov@interlan.se"
moz-do-not-send="true"><torbjorn.eklov@interlan.se></a>;
<a class="moz-txt-link-abbreviated"
href="mailto:kea-users@lists.isc.org"
moz-do-not-send="true">kea-users@lists.isc.org</a>;
<a class="moz-txt-link-abbreviated"
href="mailto:russell.aspinwall@bcs.org.uk"
moz-do-not-send="true">russell.aspinwall@bcs.org.uk</a><br>
<b>Subject:</b> Re: [Kea-users] Kea 1.6 DHCP6
configuration on Raspberry Pi 3b running Ubuntu 20.04</span></p>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal">Hi<br>
<br>
Thanks for the feedback, my router is pfsense firewall and
I haveconfigured the LAN side Router Advertisements as <br>
Managed -RA Flags [managed. other stateful], Prefix flags
[onlink, router] but the dhcp6 client get a ::/128
address<br>
I have also configured the correct RA subnet for the
interface but while the clients get an IPv6 address from
the pool, the subnet is still wrong.<br>
<br>
Thanks<br>
<br>
Russell<br>
<br>
<br>
<br>
On 01/03/2021 16:30, Torbjörn Eklöv wrote:</p>
</div>
<blockquote>
<div>
<p class="MsoNormal">DHCPv6 only gives you an address, RA
is the one who gives you the infrastructure.</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<div>
<p class="MsoNormal"> </p>
</div>
<div id="Signature">
<div>
<div>
<div>
<div>
<p class="MsoNormal"><br>
<br>
/Torbjörn Eklöv<br>
Interlan Gefle AB<br>
mobil: 070 - 683 51 75<br>
<a href="http://test-ipv6.se"
moz-do-not-send="true">http://test-ipv6.se</a></p>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">A home without IPv6 is
just a house</p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<div class="MsoNormal">
<hr width="100%"> </div>
<div id="divRplyFwdMsg">
<p class="MsoNormal"><b>Från:</b> Kea-users <a
href="mailto:kea-users-bounces@lists.isc.org"
moz-do-not-send="true">
<kea-users-bounces@lists.isc.org></a> för
russell aspinwall <a
href="mailto:raspinwall@willows7.myzen.co.uk"
moz-do-not-send="true">
<raspinwall@willows7.myzen.co.uk></a><br>
<b>Skickat:</b> den 1 mars 2021 17:23<br>
<b>Till:</b> <a href="mailto:kea-users@lists.isc.org"
moz-do-not-send="true">kea-users@lists.isc.org</a> <a
href="mailto:kea-users@lists.isc.org"
moz-do-not-send="true"><kea-users@lists.isc.org></a><br>
<b>Ämne:</b> [Kea-users] Kea 1.6 DHCP6 configuration on
Raspberry Pi 3b running Ubuntu 20.04 </p>
<div>
<p class="MsoNormal"> </p>
</div>
</div>
<div>
<div>
<p class="MsoNormal">Hi,<br>
<br>
I have successfully configured HA between two
Raspberry Pi 3bs running <br>
Ubuntu server 20.04 with repository Kea 1.6 version.<br>
<br>
I have configured a DHCP6 range and a pool but the
client always has a <br>
::/128 address.<br>
<br>
As I have a mixture of staticly assigned and dhcp6
clients in the same <br>
::/64 subnet, I have specified my ::/64 subnet in the<br>
<br>
{<br>
"id": 2012,<br>
"pools": [ { "pool":
"NNNN:PPPP:QQQQ:T:ffff::/80" } ],<br>
"subnet": "NNNN:PPPP:QQQQ:T::/64",<br>
"interface": "eth0",<br>
"option-data" : [<br>
{<br>
"name": "domain-search",<br>
"csv-format": true,<br>
"data": "euclid.plato"<br>
},<br>
{<br>
"name": "dns-servers",<br>
"data":
"NNNN:PPPP:QQQQ:T:8213:1132:6645:2222"<br>
},<br>
{<br>
"name": "sntp-servers",<br>
"data":
"NNNN:PPPP:QQQQ:T:8213:1132:6645:2222"<br>
}<br>
<br>
]<br>
<br>
}<br>
<br>
How I can I assign a ::/64 address which is selected
from only a smaller <br>
portion of the ::/64 subnet so that the client is
assigned a ::/64 address.<br>
<br>
Thanks<br>
<br>
Russell<br>
<br>
_______________________________________________<br>
ISC funds the development of this software with paid
support subscriptions. Contact us at <a
href="https://www.isc.org/contact/"
moz-do-not-send="true">https://www.isc.org/contact/</a>
for more information.<br>
<br>
To unsubscribe visit <a
href="https://lists.isc.org/mailman/listinfo/kea-users"
moz-do-not-send="true">https://lists.isc.org/mailman/listinfo/kea-users</a>.<br>
<br>
Kea-users mailing list<br>
<a href="mailto:Kea-users@lists.isc.org"
moz-do-not-send="true">Kea-users@lists.isc.org</a><br>
<a
href="https://lists.isc.org/mailman/listinfo/kea-users"
moz-do-not-send="true">https://lists.isc.org/mailman/listinfo/kea-users</a></p>
</div>
</div>
</blockquote>
<p> </p>
</div>
</blockquote>
<p><br>
</p>
</blockquote>
<p><br>
</p>
</body>
</html>