demo stuff

[Francisco Obispo]

On Mar 17, 2012, at 12:02 PM, Dave Taht wrote:

> On Sat, Mar 17, 2012 at 11:53 AM, Francisco Obispo <fobispo at isc.org> wrote:
>> well, I was not implying to use 802.1q trunk or anything like that.. just use the physical switch and separate it into two 'logical' switches …
> 
> It's actually that + the mirror port for wireshark. What gets mirrored
> in this case?
> 

Yes,

I believe we're only configuring a span port for the internal LAN (CPEs <-> CGNs) not on what goes out to the Internet.. if we need to do that, we might need to figure that part out.




> Assuming the switch requires windows to configure I don't have the os
> to try this handy.
> 
> I'll find out this afternoon and get back to you all.
> 
>> 
>> 
>> I agree, adding VLANs (802.1q) trunks would not be advisable at this point.
>> 
>> 
>> On Mar 17, 2012, at 11:39 AM, Dave Taht wrote:
>> 
>>> I appreciate your urge to minimize hardware requirements, but adding vlans
>>> into the mix implies that everything can work on a vlan, and I've had enormous
>>> troubles with vlans and ipv6 in general, and little faith in the
>>> usb-ethernet devices
>>> (already borne out by needing a new kernel for them to even work), and
>>> getting vlans to work involves getting all the devices to come up properly
>>> on the right vlans.
>> 
>> Francisco Obispo
>> email: fobispo at isc.org
>> Phone: +1 650 423 1374 || INOC-DBA *3557* NOC
>> PGP KeyID = B38DB1BE
>> 
> 
> 
> 
> -- 
> Dave Täht
> SKYPE: davetaht
> US Tel: 1-239-829-5608
> http://www.bufferbloat.net

Francisco Obispo 
email: fobispo at isc.org
Phone: +1 650 423 1374 || INOC-DBA *3557* NOC
PGP KeyID = B38DB1BE