updates... pieces flying in loose format.

[Francis Dupont]

> 1) 2 laptops installed, but not deployed anywhere as yet

=> fine!

> 3) upnpdc built,runs, have no idea what to do with it, installed on sd-cpe2

=> I believe you mean miniupnpc (+). It is move useful on clients
but for UPnP-IGD/NAT-PMP/PCP the SD-B4 are clients too.

> 4) sd-cpe2 installed with temporary ipv4 address only reachable from
> parts of the lab. everything that is
>      required for a b4 box is on it, or so I hope.  root is the
> standard password I assigned earlier.

=> SD-CPE => SD-B4

> 5) invalid configs, static setup on ida? (which is what I'd hope to
> model sd-cpe1 or two on)

=> for the SD-CPE (opps, SD-B4) I explained what to do in the SD-B4
boostrap message, the missing part is the sdctld.conf file.
The base is rt28354/conf/testbeds/vm/sdb4-sdctld.conf with:
 - change the external interface name in ext_ifname
 - change the external IP address (when it will be knowns)
 - put the internal IPv4 prefix in listening_ip
 - update the bitrates if you want
 - update the uuid (so they will be unique to each SD-B4 box)
 - update the serial/model
 - update the sd_parameters on at least the SD-B4 2
Note in a dynamic config the external IP address and the sd_parameters
are from the DHCPv4 client. BTW what is your favorite string editor
for Cerowrt shell scripts (dslite-6rd uses a dedicated dhcpcalc binary)?

Regards

Francis Dupont <fdupont at isc.org>