Announcing the release of BIND 9.2.0a1

Brian Wellington Brian.Wellington at nominum.com
Fri Jun 1 22:24:47 UTC 2001



BIND 9.2.0a1 is now available.  This is the first alpha release of BIND
9.2.0.  It contains significant changes over 9.1.  As this is an alpha
release, there are expected to be additional changes before the release.

BIND 9.2.0a1 can be downloaded from

	ftp://ftp.isc.org/isc/bind9/9.2.0a1/bind-9.2.0a1.tar.gz

The PGP signature of the distribution is at

	ftp://ftp.isc.org/isc/bind9/9.2.0a1/bind-9.2.0a1.tar.gz.asc

The signature was generated with the ISC public key, which is available
at <http://www.isc.org/ISC/isckey.txt>.

The full list of changes is too long to be listed here; see the file
CHANGES in the distribution.


--------

BIND 9

	BIND version 9 is a major rewrite of nearly all aspects of the
	underlying BIND architecture.  Some of the important features of
	BIND 9 are:

		- DNS Security
			DNSSEC (signed zones)
			TSIG (signed DNS requests)

		- IP version 6
			Answers DNS queries on IPv6 sockets
			IPv6 resource records (A6, DNAME, etc.)
			Bitstring Labels
			Experimental IPv6 Resolver Library

		- DNS Protocol Enhancements
			IXFR, DDNS, Notify, EDNS0
			Improved standards conformance

		- Views
			One server process can provide multiple "views" of
			the DNS namespace, e.g. an "inside" view to certain
			clients, and an "outside" view to others.

		- Multiprocessor Support

		- Improved Portability Architecture


	BIND version 9 development has been underwritten by the following
	organizations:

		Sun Microsystems, Inc.
		Hewlett Packard
		Compaq Computer Corporation
		IBM
		Process Software Corporation
		Silicon Graphics, Inc.
		Network Associates, Inc.
		U.S. Defense Information Systems Agency
		USENIX Association
		Stichting NLnet - NLnet Foundation



BIND 9.2

	BIND 9.2.0a1 is the first alpha release of BIND 9.2.0.
	It includes a number of new features over 9.1, including:

	  - The size of the cache can now be limited using the
            "max-cache-size" option.

	  - The server can now automatically convert RFC1886-style
	    recursive lookup requests into RFC2874-style lookups,
	    when enabled using the new option "allow-v6-synthesis".
            This allows stub resolvers that support AAAA records
            but not A6 record chains or binary labels to perform
            lookups in domains that make use of these IPv6 DNS
            features.

	  - Performance has been improved.

	  - The man pages now use the more portable "man" macros
	    rather than the "mandoc" macros, and are installed
            by "make install".

          - The named.conf parser has been completely rewritten.
            It now supports "include" directives in more
            places such as inside "view" statememnts, and it no
            longer has any reserved words.

          - The "rndc status" command is now implemented.

	  - rndc can now be configured automatically.

	  - A BIND 8 compatible stub resolver library is now included
	    in lib/bind.  It is not built by default, and may not build
	    on all supported platforms yet.

	This distribution already includes a new lightweight stub
	resolver library and associated resolver daemon that fully
	support forward and reverse lookups of both IPv4 and IPv6
	addresses.  This library is still considered experimental and
	is not a complete replacement for the BIND 8 resolver library.
	Applications that use the BIND 8 res_* functions to perform
	DNS lookups or dynamic updates still need to be linked against
	the BIND 8 libraries.  For DNS lookups, they can also use the
	new "getrrsetbyname()" API.

	BIND 9.2 is capable of acting as an authoritative server
	for DNSSEC secured zones.  This functionality is believed to
	be stable and complete except for lacking support for wildcard
	records in secure zones.

	When acting as a caching server, BIND 9.2 can be configured
	to perform DNSSEC secure resolution on behalf of its clients.
	This part of the DNSSEC implementation is still considered
	experimental.  For detailed information about the state of the
	DNSSEC implementation, see the file doc/misc/dnssec.

	There are a few known bugs:

		On some systems, IPv6 and IPv4 sockets interact in
		unexpected ways.  For details, see doc/misc/ipv6.
		To reduce the impact of these problems, the server
		no longer listens for requests on IPv6 addresses
		by default.  If you need to accept DNS queries over
		IPv6, you must specify "listen-on-v6 { any; };"
		in the named.conf options statement.

		FreeBSD prior to 4.2 (and 4.2 if running as non-root)
		and OpenBSD prior to 2.8 log messages like
		"fcntl(8, F_SETFL, 4): Inappropriate ioctl for device".
		This is due to a bug in "/dev/random" and impacts the
		server's DNSSEC support.

		--with-libtool does not work on AIX.

	A bug in the Windows 2000 DNS server can cause zone transfers
	from a BIND 9 server to a W2K server to fail.  For details,
	see the "Zone Transfers" section in doc/misc/migration.

	For a detailed list of user-visible changes from
	previous releases, see the CHANGES file.

Building

	BIND 9 currently requires a UNIX system with an ANSI C compiler,
	basic POSIX support, and a 64 bit integer type.

	We've had successful builds and tests on the following systems:

		AIX 4.3
		COMPAQ Tru64 UNIX 4.0D
		COMPAQ Tru64 UNIX 5 (with IPv6 EAK)
		FreeBSD 3.4-STABLE, 3.5, 4.0, 4.1
		HP-UX 11
		IRIX64 6.5
		NetBSD 1.5
		Red Hat Linux 6.0, 6.1, 6.2, 7.0
		Solaris 2.6, 7, 8

	Additionally, we have unverified reports of success building
	previous versions of BIND 9 from users of the following systems:

		Slackware Linux 7.x
		OpenBSD 2.6, 2.8, -current
		UnixWare 7.1.1
		HP-UX 10.20

	To build, just

		./configure
		make

	Do not use a parallel "make".

	Several environment variables that can be set before running
	configure will affect compilation:

	    CC
		The C compiler to use.	configure tries to figure
		out the right one for supported systems.

	    CFLAGS
		C compiler flags.  Defaults to include -g and/or -O2
		as supported by the compiler.

	    STD_CINCLUDES
		System header file directories.	 Can be used to specify
		where add-on thread or IPv6 support is, for example.
		Defaults to empty string.

	    STD_CDEFINES
		Any additional preprocessor symbols you want defined.
		Defaults to empty string.

	To build shared libraries, specify "--with-libtool" on the
	configure command line.

	On some platforms, BIND 9 can be built with multithreading
	support, allowing it to take advantage of multiple CPUs.
	You can specify whether to build a multithreaded BIND 9
	by specifying "--enable-threads" or "--disable-threads"
	on the configure command line.  The default is operating
	system dependent.

	If your operating system has integrated support for IPv6, it
	will be used automatically.  If you have installed KAME IPv6
	separately, use "--with-kame[=PATH]" to specify its location.

	"make install" will install "named" and the various BIND 9 libraries.
	By default, installation is into /usr/local, but this can be changed
	with the "--prefix" option when running "configure".

	You may specify the option "--sysconfdir" to set the directory
	where configuration files like "named.conf" go by default,
	and "--localstatedir" to set the default parent directory
	of "run/named.pid".   For backwards compatibility with BIND 8,
	--sysconfdir defaults to "/etc" and --localstatedir defaults to
	"/var" if no --prefix option is given.  If there is a --prefix
	option, sysconfdir defaults to "$prefix/etc" and localstatedir
	defaults to "$prefix/var".

	To see additional configure options, run "configure --help".
	Note that the help message does not reflect the BIND 8
	compatibility defaults for sysconfdir and localstatedir.

	If you're planning on making changes to the BIND 9 source, you
	should also "make depend".  If you're using Emacs, you might find
	"make tags" helpful.

	Building with gcc is not supported, unless gcc is the vendor's usual
	compiler (e.g. the various BSD systems, Linux).

	A limited test suite can be run with "make test".  Many of
	the tests require you to configure a set of virtual IP addresses
	on your system, and some require Perl; see bin/tests/system/README
	for details.

Documentation

	The BIND 9 Administrator Reference Manual is included with the
	source distribution in DocBook XML and HTML format, in the
	doc/arm directory.

	Some of the programs in the BIND 9 distribution have man pages
	in their directories.  In particular, the command line
	options of "named" are documented in /bin/named/named.8.
	There is now also a set of man pages for the lwres library.

	If you are upgrading from BIND 8, please read the migration
	notes in doc/misc/migration.  If you are upgrading from
	BIND 4, read doc/misc/migration-4to9.


Bug Reports and Mailing Lists
	Bugs reports should be sent to

		bind9-bugs at isc.org

	To join the BIND 9 Users mailing list, send mail to

		bind9-users-request at isc.org

	If you're planning on making changes to the BIND 9 source
	code, you might want to join the BIND 9 Workers mailing list.
	Send mail to

		bind9-workers-request at isc.org





More information about the bind-announce mailing list