set up Reverse DNS zone
Barry Margolin
barmar at alum.mit.edu
Thu Dec 20 00:14:26 UTC 2007
In article <fkbacm$s2s$1 at sf1.isc.org>, ram <ram at netcore.co.in> wrote:
> Actually the IP's are BGP announced at a theplanet datacentre. Should I
> tell them to setup a reverse zone delegation ?
No, because the parent domain isn't delegated to them. 202.162.0.0/16
isn't assigned to anyone, APNIC is assigning all smaller blocks, so the
delegation has to come from them.
>
>
>
> On Wed, 2007-12-19 at 09:15 -0500, Jeff Lightner wrote:
> > Did you tell your ISP which DNS servers to use for your reverse lookups?
> >
> > Your Registrar typically provides you the domain name. Many will also
> > allow you to setup your DNS entries on their DNS servers. However, they
> > don't own the IP range provided by your ISP (unless they are also your
> > ISP). The ISP has to do a reverse delegation pointing to the correct
> > DNS servers for the IP range they gave you.
> >
> > For example in our zones we have Network Solutions as Registrar, our own
> > in house DNS servers and AT&T as the internet carrier. We had to tell
> > BOTH Network Solutions AND AT&T what our DNS servers were. Network
> > Solutions so it could delegate forward lookups to us and AT&T so it
> > could delegate reverse lookups to us.
> >
> > -----Original Message-----
> > From: bind-users-bounce at isc.org [mailto:bind-users-bounce at isc.org] On
> > Behalf Of ram
> > Sent: Wednesday, December 19, 2007 2:27 AM
> > To: DNS BIND
> > Subject: OT: set up Reverse DNS zone
> >
> > The APNIC site is extremely unhelpful in setting up new reverse DNS
> > zones
> >
> > I want the the NS record for our servers to be pointed to our DNS
> > servers and nothing has done inspite of giving the request on the APNIC
> > page
> > http://www.apnic.net/services/dns_guide.html
> >
> > http://www.apnic.net/db/domain.html
> >
> > They have not setup the the NS record for my zones
> > 242.162.202.in-addr.arpa . We recieved a mail from them and took the
> > necessary actions but nothing has been done since 1 week now
> >
> > Can someone guide me whom can I approach for proper help
> >
> >
> > Thanks
> > Ram
> > ----------------------------------
> > CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential
> > information and is for the sole use of the intended recipient(s). If you
> > are not the intended recipient, any disclosure, copying, distribution, or
> > use of the contents of this information is prohibited and may be unlawful.
> > If you have received this electronic transmission in error, please reply
> > immediately to the sender that you have received the message in error, and
> > delete it. Thank you.
> > ----------------------------------
--
Barry Margolin, barmar at alum.mit.edu
Arlington, MA
*** PLEASE post questions in newsgroups, not directly to me ***
*** PLEASE don't copy me on replies, I'll read them in the group ***
More information about the bind-users
mailing list