Slave server not using the IP set using transfer-source

[Dixon, Justin]

>I have 3 servers set up using bind 9.2.4-30. I am using 3 different
views and have an IP address on each slave for each view so that the
slaves >are directed to the correct zone files when contacting the
master to refresh a zone, etc. I have run into a problem with the slaves
not respecting >the ip address using transfer-source in the zone
definitions. The slave uses the transfer-source IP when retrieving the
zone file for the first time >from the master & when refreshing the zone
file. However when a notify is received by the slave from the master,
the slave tries to retrieve the >new zone file using the slave servers
default IP. The slave is not directed to the correct view on the master
causing the slave to not receive the >updated zone file. Does anyone
have an idea on why this would happen?
>
>Thanks,
>
>Mark

 

See https://www.isc.org/node/282

 

Justin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/bind-users/attachments/20090728/00cc4337/attachment.html>