Upgrade from 3.1.0 to 4.1.1

[Abu Abdulla alhanbali]

this is for shared network for the same DHCP instance. i'm trying from
another DHCP

On Wed, Feb 24, 2010 at 1:39 PM, Simon Hobson <dhcp1 at thehobsons.co.uk> wrote:
> Abu Abdulla alhanbali wrote:
>
>> i tried another thing which didn't work. i created a virtual interface
>> with different IP in the same subnet and it results with this error:
>> No subnet declaration for nxge0:1 (no IPv4 addresses).
>
> When you do that, you are creating a shared network, and you must declare it
> in your config :
>
> shared-network "some-random-label" {
>  subnet ...
>  subnet ...
> }
>
> This tell the DHCP server that both subnets are on the same physical wire.
>
> --
> Simon Hobson
>
> WANTED: "Software CD ROM Kit" for Canon CLBP 360-PS printer (Canon part no
> RH6-3612, or possibly RH6-3810, or RH6-3610 might do). I've a dead HD and
> need this CD so I can replace the disk and re-install the printer OS on it.
> If anyone knows where I might get hold of one I'd be grateful - requests to
> Canon drew a blank, it's been out of support for years.
> Alternatively, if anyone has one of these and would let me image their hard
> disk ...
>
> Visit http://www.magpiesnestpublishing.co.uk/ for books by acclaimed
> author Gladys Hobson. Novels - poetry - short stories - ideal as
> Christmas stocking fillers. Some available as e-books.
> _______________________________________________
> dhcp-users mailing list
> dhcp-users at lists.isc.org
> https://lists.isc.org/mailman/listinfo/dhcp-users
>