DHCP server failover behind relay
Glenn Satchell
glenn.satchell at uniq.com.au
Thu Sep 6 03:09:15 UTC 2012
On Thu, September 6, 2012 7:08 am, Vadym Abramchuk wrote:
> 2012/9/5 Simon Hobson <dhcp1 at thehobsons.co.uk>
>
>> Vadym Abramchuk wrote:
>>
>> Unfortunally, none of my relay agents can send packets to both servers.
>>>
>>
>> So the proper fix is to get the vendor of the broken relay agent to fix
>> it
>> ;-)
>
>
> My local supplier said it's not going to happen. At least before Second
> Marsian War ends ;-).
>
Please see this page, for example. Perhaps it is the same software version
as your switch?
http://sipi.usc.edu/manuals/dell/6024/cli_html/dhcp.htm
ip dhcp relay address
The ip dhcp relay address global configuration command defines the DHCP
servers available for the DHCP relay. To remove a server from the
available DHCP servers list, use the no form of this command.
Syntax
ip dhcp relay address ip-address
no dhcp relay address ip-address
ip-addressDHCP server IP address. Up to 8 servers can be defined.
HTH.
regards,
-glenn
More information about the dhcp-users
mailing list