DHCP server failover behind relay
abramm at gmail.com
Thu Sep 6 06:08:19 UTC 2012
2012/9/6 Glenn Satchell <glenn.satchell at uniq.com.au>
> On Thu, September 6, 2012 7:08 am, Vadym Abramchuk wrote:
> > 2012/9/5 Simon Hobson <dhcp1 at thehobsons.co.uk>
> >> Vadym Abramchuk wrote:
> >> Unfortunally, none of my relay agents can send packets to both servers.
> >> So the proper fix is to get the vendor of the broken relay agent to fix
> >> it
> >> ;-)
> > My local supplier said it's not going to happen. At least before Second
> > Marsian War ends ;-).
> Please see this page, for example. Perhaps it is the same software version
> as your switch?
> ip dhcp relay address
> The ip dhcp relay address global configuration command defines the DHCP
> servers available for the DHCP relay. To remove a server from the
> available DHCP servers list, use the no form of this command.
> ip dhcp relay address ip-address
> no dhcp relay address ip-address
> ip-address—DHCP server IP address. Up to 8 servers can be defined.
Tried this; this way the switch tries to failover DHCP servers in it's own
That doesn't work as it sends single packet to only one of servers.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the dhcp-users