Requesting a lease time in dhclient6.conf
glenn.satchell at uniq.com.au
Fri Feb 14 01:57:35 UTC 2014
There's also some options listed in the dhcp-options(5) man page, scroll
down to the section titled "STANDARD DHCPV6 OPTIONS". These are all listed
as option dhcp6.*
On Fri, February 14, 2014 4:15 am, Joseph Bernard wrote:
> I just gave myself a crash corse in DHCP options, so some of this may be
> wrong. dhcp-lease-time corresponds to option 51 for DHCPv4 as defined in
> the common/tables.c file of the ISC DHCP source code. The DHCPv4 spec
> defines option 51 as "Address Time". For DHCPv6, the options aren't the
> same. As far as I can tell, there is no DHCPv6 equivalent option for
> "Address Time". This might change in the future. Here are the links I
> used to figure this out:
> Joseph B.
> On Feb 13, 2014, at 8:54 AM, Mike. <the.lists at mgm51.com>
>> On 2/9/2014 at 11:20 AM Mike. wrote:
>> |(dhcp 4.2)
>> |With the IPv4 dhclient, I use the following to request a specific
>> |lease time:
>> | send dhcp-lease-time 84000;
>> |I've not been able to find a similar or equivalent configuration
>> |parameter for the IPv6 dhclient.
>> |How do I request a specific lease time in dhclient6.conf?
>> Am I asking the wrong question, or does no one know the answer?
>> dhcp-users mailing list
>> dhcp-users at lists.isc.org
> dhcp-users mailing list
> dhcp-users at lists.isc.org
More information about the dhcp-users