about the SD-NAT lab

[Francis Dupont]

On the 3 laptops at least two have a sticker. The "primary" and the
"backup" laptops must not be connected at the same time (they have
the same Ethernet addresses). We need to check but I believe the
"backup" got the addresses of the "primary" one (I supposed the Ethernet
address is written on the back), the box using the addresses of the
other should be restored in a more sane config: the critical file
is /etc/network/interfaces (there should be a backup of it).

I suggest for the lab to recycle temporary the backup AFTR as a client
so we get:
 - one AFTR
 - some CPEs including a laptop one (the third laptop)
 - at least one client

In Paris we used different tables with different Ethernet cable colors
(BTW I *really* insist to get rid of wireless: we need to have to solve
one problem at one time, the wireless setup on WNDRs is a real mess).
Note we need a switch behind the laptop CPE.

I've worked a bit on the VMs but they are not ready yet...

Regards

Francis Dupont <fdupont at isc.org>