about the SD-NAT lab

[Dave Taht]

Rory has been doing some electrical work in the lab, it's nearly done.
I've had also to recable most of it, and that's sort of in progress.

I've moved the relevant power strip over, have not powered anything up.

I figure the rework in here will be done before friday.

Thank you for the info regarding the duplicate macs! I would have been
very puzzled.

On Wed, Apr 4, 2012 at 10:45 AM, Francis Dupont <fdupont at isc.org> wrote:
> On the 3 laptops at least two have a sticker. The "primary" and the
> "backup" laptops must not be connected at the same time (they have
> the same Ethernet addresses). We need to check but I believe the
> "backup" got the addresses of the "primary" one (I supposed the Ethernet
> address is written on the back), the box using the addresses of the
> other should be restored in a more sane config: the critical file
> is /etc/network/interfaces (there should be a backup of it).
>
> I suggest for the lab to recycle temporary the backup AFTR as a client
> so we get:
>  - one AFTR
>  - some CPEs including a laptop one (the third laptop)
>  - at least one client
>
> In Paris we used different tables with different Ethernet cable colors


> (BTW I *really* insist to get rid of wireless: we need to have to solve
> one problem at one time, the wireless setup on WNDRs is a real mess).

BTW, I really insist that wireless remain part of the testing,
as wireless is how the real world works, and should be played with.

I do not have a problem with simplifying the firmware build so it is
one problem at a time, however.

> Note we need a switch behind the laptop CPE.

Understood.

> I've worked a bit on the VMs but they are not ready yet...
>
> Regards
>
> Francis Dupont <fdupont at isc.org>
> _______________________________________________
> sdcpe-devel mailing list
> sdcpe-devel at lists.isc.org
> https://lists.isc.org/mailman/listinfo/sdcpe-devel



-- 
Dave Täht
SKYPE: davetaht
US Tel: 1-239-829-5608
http://www.bufferbloat.net