[stork-users] Stork agent install

Craig Dunn sendai789 at googlemail.com
Thu May 27 12:46:20 UTC 2021


ok so I installed all the pre-reqs the site shows and running he agent
install I get the following error:

pi at DHCP1:/usr/local/etc/stork $ sudo rake install_agent
Stork build date: 2021-05-27 12:51 (timestamp: 210527125147)
/usr/local/etc/stork/tools/1.15.5/go/bin/go get -d -u
github.com/golang/protobuf/protoc-gen-go
/usr/local/etc/stork/tools/1.15.5/go/bin/go: 1:
/usr/local/etc/stork/tools/1.15.5/go/bin/go:ELF: not found
/usr/local/etc/stork/tools/1.15.5/go/bin/go: 2:
/usr/local/etc/stork/tools/1.15.5/go/bin/go: @: not found
/usr/local/etc/stork/tools/1.15.5/go/bin/go: 3:
/usr/local/etc/stork/tools/1.15.5/go/bin/go: Syntax error: "(" unexpected
rake aborted!
Command failed with status (2):
[/usr/local/etc/stork/tools/1.15.5/go/bin/g...]
/usr/local/etc/stork/Rakefile:254:in `block in <top (required)>'
Tasks: TOP => install_agent => build_agent =>
/usr/local/etc/stork/backend/api/agent.pb.go =>
/root/go/bin/protoc-gen-go-v1.3.3
(See full trace by running task with --trace)

Google searches has shown little in the way of help, anyone have any ideas?

Thanks

On Wed, 26 May 2021 at 22:50, Craig Dunn <sendai789 at googlemail.com> wrote:

> Thanks Jesse, I have Ubuntu 18.04  currently I'll check the link out and
> give it a try.
>
> On Wed, 26 May 2021, 22:40 Jesse McDermid, <jesse.mcdermid at mahaska.org>
> wrote:
>
>> It is possible. Building from source is covered here:
>> https://stork.readthedocs.io/en/v0.17.0/install.html#installing-from-sources.
>> It has been a few releases since I did it last, but I think you will find
>> the experience least painful if you use Ubuntu 18. I tried using CentOS 7
>> and gave up: too many prerequisites required versions that were not
>> standard to that release.
>>
>>
>>
>> -Jesse
>>
>>
>>
>> *From:* Stork-users <stork-users-bounces at lists.isc.org> *On Behalf Of *Craig
>> Dunn
>> *Sent:* Monday, May 24, 2021 12:52 PM
>> *To:* stork-users at lists.isc.org
>> *Subject:* [stork-users] Stork agent install
>>
>>
>>
>> Hi all,
>>
>>
>>
>> I have been user Kea for DHCP for a while now, I experimented with stork
>> as well but my DHCP server is arm based so currently there is no install
>> candidate for the stork agent. I was wondering if I can build from source?
>> I searched the gitlab repo and cloudsmith but there are no instructions or
>> anything saying you can.
>>
>>
>>
>> Thanks guys
>> --
>> Stork-users mailing list
>> Stork-users at lists.isc.org
>> https://lists.isc.org/mailman/listinfo/stork-users
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.isc.org/pipermail/stork-users/attachments/20210527/8c502b90/attachment.htm>


More information about the Stork-users mailing list