[stork-users] possible bug ?

[Marcin Siodelski]

I explained this in the kea-users list thread. I also opened a Stork bug 
ticket: https://gitlab.isc.org/isc-projects/stork/-/issues/1198

Marcin

On 13.10.2023 08:38, DDFR | Ronald Blaas wrote:
> 
> I do read in the documentation that output-options (with dash) is now 
> the default...
> Might have something to do with this..
> 
> 
> ------------------------------------------------------------------------
> *Van:* Stork-users <stork-users-bounces at lists.isc.org> namens DDFR | 
> Ronald Blaas <ronald.blaas at ddfr.nl>
> *Verzonden:* vrijdag 13 oktober 2023 08:25
> *Aan:* Marcin Siodelski <marcin at isc.org>; Stork-users 
> <stork-users at lists.isc.org>
> *Onderwerp:* Re: [stork-users] possible bug ?
> Hi Marcin,
> 
> We are using kea 2.5.2 and using the original output_options (with 
> underscore)
> 
> I shall ask this question on the kea user list as well.
> Maybe there is some solution.
> 
> Thnx for replying 🙂
> 
> Regards
> 
> Ronald
> 
> ------------------------------------------------------------------------
> *Van:* Marcin Siodelski <marcin at isc.org>
> *Verzonden:* donderdag 12 oktober 2023 21:39
> *Aan:* DDFR | Ronald Blaas <ronald.blaas at ddfr.nl>; Stork-users 
> <stork-users at lists.isc.org>
> *Onderwerp:* Re: [stork-users] possible bug ?
> Hi Ronald,
> 
> I don't recall any change in Stork between 1.12 and 1.13 that could
> affect loggers. However, in Kea 2.5.1 there was a change in the Kea
> configuration that added an alias output-options for the logger
> parameter output_options. If your Kea configuration uses the
> output-options (with a hyphen) Stork may not recognize it correctly. Can
> you please check (and maybe share) your loggers configuration in Kea? If
> you're using an older Kea version or/and you're not using the new alias
> it must be something different.
> 
> I had a quick check and I see the loggers just fine in our Stork demo
> setup. We're using Kea 2.4.0 and the legacy output_options (underscore)
> for logger specification.
> 
> Marcin Siodelski
> Sr. Software Engineer,
> ISC
> 
> On 12.10.2023 21:08, DDFR | Ronald Blaas wrote:
>> Hi ,
>>
>> With the new stork version (1.13) a new bug has come up.
>>
>> The stork server does not tell me the log location anymore.
>>
>> This is as well for DHCPv4 as for CA.
>>
>> Don't know if this is the way to report it.
>>
>> I found the log option there very handy. Would be a shame if it is gone.
>>
>> Maybe there is something I can adjust to get this back ?
>>
>> Regards,
>>
>> Ronald
>>
>